Force Motors
Force Motors Sanman-6000 and Massey Ferguson 8055 Magnatrak
| Engine | |||||
|---|---|---|---|---|---|
| Engine type | 3 Cylinder 4 Stroke, Inline Direct Injection Turbo Charger With Intercooler | N/A | |||
| Engine rated RPM | 2200 RPM | N/A | |||
| HP Category | 50 HP | 50 HP | |||
| No. of cylinder | 3 Cylinder | N/A | |||
| Max Torque - Nm | N/A | 200 Nm | |||
| Cooling System | Water Cooled | N/A | |||
| Fuel type | Diesel | N/A | |||
| Height | 3640 mm | N/A | |||
| Hydraulics | 1450 | N/A | |||
| Transmission | |||||
| Transmission type | Synchromesh | Comfimesh (Fully Constant Mesh) | |||
| No. of gears Forward | 8 Forward | 8 Forward Forward | |||
| No. of gears Reverse | 4 Reverse | 2 Reverse Reverse | |||
| Brakes type | Fully Oil Immersed Multiplate Sealed Disk Breaks | Oil Immersed Brakes | |||
| clutch type | Dual, Dry Mechanical Actuation | Dual Clutch | |||
| Gear Box Type | 8 Forward + 4 Reverse | N/A | |||
| Power Take Off | |||||
| PTO RPM @ engine, rpm | 540 and 1000 RPM | N/A | |||
| PTO Type | N/A | RPTO | |||
| Steering | |||||
| Steering type | Power Steering | Power Steering | |||
| Hydraulic | |||||
| Lifting Capacity Max. | 1450 Kg | 1800 kgf Kg | |||
| 3 Point Linkage | CAT- II | N/A | |||
| Type | ADDC System With Bosch Control Valve | N/A | |||
| Dimensions & Weight | |||||
| Ground Clearance | 394/430 mm Nm | 430 mm Nm | |||
| Total Weight | 2080/2130 Kg | 2240 kg Kg | |||
| Overall Length | N/A | 3460 mm mm | |||
| Overall Width | N/A | 1800 mm mm | |||
| Wheel Base | 2032 mm mm | 2000 mm mm | |||
| Wheels & Tyres | |||||
| Tyre Size Front | 7.50 x 16 | 19.05 cm x 40.64 cm (7.5 x 16) | |||
| Tyre Size Rear | 14.9 x 28 / 16.9 x 28 | 37.85 cm x 71.12 cm (14.9 x 28) | |||
| Electrical | |||||
| Others | |||||
| Accessories | N/A | Uplift kit, Transport Lock Valve (TLV), water bottle holder, mobile charger & holder, chain stabilizer, check chain | |||
