New Holland
New Holland 3030 NX and Powertrac 434 RDX
| Engine | |||||
|---|---|---|---|---|---|
| Engine type | Bharat TREM III A | N/A | |||
| Engine rated RPM | N/A | 2000 RPM | |||
| HP Category | 35 HP | 35 HP | |||
| Displacement CC in | N/A | 2340 CC | |||
| No. of cylinder | 3 Cylinder | 3 Cylinder | |||
| Cooling System | Water Cooled | Water Cooled | |||
| Fuel type | Diesel | Diesel | |||
| Fuel Pump Type | Inline | Inline pump | |||
| Hydraulics | N/A | 1600 - Sensi-1 | |||
| Transmission | |||||
| Transmission type | Constant Mesh, High/Low Range, Side Shift, Neutral Safety Switch | Constant mesh | |||
| No. of gears Forward | 8 Forward | 8 Forward | |||
| No. of gears Reverse | 2 Reverse | 2 Reverse | |||
| Brakes type | Oil Immersed Multi Disc Brakes | Multi Plate Oil Immersed Disc Brakes | |||
| clutch type | Diaphragm Type, Single Clutch | Single Clutch | |||
| Gear Box Type | 8 Forward + 2 Reverse | 8 Forward + 2 Reverse | |||
| Front Axle | Fix Fabricated U-Beam with Heavy Duty Cast Iron Axle support | N/A | |||
| Rear Axle | N/A | Inboard Reduction | |||
| Power Take Off | |||||
| PTO Type | N/A | Single 540 | |||
| Steering | |||||
| Steering type | Manual Steering | Power Steering / Mechanical Single drop arm option | |||
| Hydraulic | |||||
| Lifting Capacity Max. | N/A | 1600 Kg | |||
| 3 Point Linkage | N/A | 3 Lever, Automatic Depth & Draft Control | |||
| Type | Automatic Depth and Draft Control, Mixed Control, Lift- O-Matic, Response Control, Multiple Sensitivity Control, Isolator Valve | N/A | |||
| Dimensions & Weight | |||||
| Ground Clearance | N/A | 375 Nm | |||
| Total Weight | N/A | 1850 Kg | |||
| Wheel Base | N/A | 2060 mm | |||
| Wheels & Tyres | |||||
| Tyre Size Front | 6.00 x 16 | 6.00 x 16 | |||
| Tyre Size Rear | 12.4 x 28 | 12.4x28 / 13.6X28 | |||
| Electrical | |||||
| Others | |||||
